Every hydraulic hammer needs regular greasing every hour or two. One of the most common and avoidable repairs we see is premature wear in the hydraulic hammer lower tool bushing due to lack of grease. We also often see people using the wrong type of grease. Many operators mistakenly believe that all grease is created equal – but it isn’t! The grease that works well for pins and tracks will not hold up to the extreme use of the hydraulic hammer. Consider that your hydraulic hammer tool bit moves up and down in the bushing several hundred times per minute. Special hydraulic hammer grease, also sometimes called chisel paste, is highly rrecommended. Fel-Tech packs and sells their own special formulation of extreme pressure hydraulic hammer grease. Our grease is recommended for use in all makes and models of hydraulic hammer. We sell it by the 14oz tube or the 35lb pail.
Contact us today to order grease!